14 L 050 Timing Belt Pulley | L Pitch, 1/2" Wide | CTS
- Model
- 14 L 050 (Type 6F)
Item specifics
- Material
- Carbon Steel
- Color
- Natural
- Surface Treatment
- Anodizing/Hardening/Plating/Powder Coating/Passiva
- Accuracy
- High precision timing belt pulley
- Quality
- Durable timing belt pulley
- Interchangeability
- Directly interchangeable with other brands
Review
Description
About 14 L 050 Timing Belt Pulleys
CTS® 14 L 050 Timing Belt Pulley
A 14 L 050 pulley is a small, flanged L-pitch timing pulley for a 1/2 inch wide belt. 14 teeth make it the compact end of the L range: it gives the most ratio per millimetre of diameter, which is exactly what you want in a tight machine layout, and it asks for a little more care in tensioning and alignment than a larger pulley would.
For a quotation or other information on the L timing belt pulley, please contact us, and we will be happy to help you.
Quality Assurance:
ISO9001: 2015 and GB/T24001-2016 / ISO14001: 2015.
14 L 050 Timing Belt Pulleys Technical Data
14 L 050 Timing Belt Pulley Dimensions
- Number of teeth: 14
- Type: 6F
- Material: ST
- Belt width: 12.7 mm
- Dp: 42.45 mm
- De: 41.68 mm
- Df: 48 mm
- F: 19 mm
- L: 30 mm
- Dm: 28 mm
- Pilot bore d: 8 mm
- Finished bore hole d-max: 20 mm
- Weight (Approx.): 0.250 kg

Reading the Part Number
The three fields are a description, not an arbitrary code:
14 — the number of teeth on the pulley.
L — the tooth profile: an imperial trapezoidal pitch of 3/8 inch. L sits between XL and H in capacity.
050 — the belt width code: a 1/2-inch (12.7 mm) belt.
Once you can read the code, the rest of the range becomes navigable: a 30 L 050 has the same pitch and width but more teeth, and a 14 L 075 is the same pulley with a wider belt.
Timing Pulley Materials and Finish
✔ Steel (C45 / 1045) is the default for L pulleys: strong hubs, good wear life, and it takes a keyway cleanly. Supplied black-oxidized or oiled.
✔ Grey cast iron gives good damping and runs quietly, and is common on larger diameters.
✔ Aluminium suits low-load, low-inertia applications; it does not take the same tooth wear as steel.
✔ Stainless is available for washdown and food contact.
L-pitch pulleys are usually supplied unhardened. Hardened teeth are available on request where abrasive dust or high cycle counts make tooth wear the limiting factor.




