How to select the model and specification of welded steel type drag chains

How to select the model and specification of welded steel type drag chains

Summary

Welded steel type drag chain is widely used in all walks of life because of its strong durability, wear resistance and corrosion resistance.

Welded steel type drag chain is widely used in all walks of life because of its strong durability, wear resistance and corrosion resistance. When you need to buy welded steel type drag chains, how to choose the model suitable for your own equipment?

When customizing the welded steel type drag chains, the selection of model is a must when purchasing. If you choose the right one, you can effectively protect and pull the built-in conduit. If you choose the wrong one, you may not be able to use it. Here are some tips:

In contrast, the selection of welded steel type drag chains is more complicated than that of engineering plastic drag chain:

1. First of all, we need to determine the model of the welded steel type drag chains, and determine the model of the drag chain (i.e. the inner height) according to the diameter of the built-in line and pipe, plus at least 15% of the activity space;

2. Confirm the type of drag chain support plate. Type I - integral type (drilling), type II - upper and lower separate type (drilling), type III - frame type (separator);

3. According to the sum of line and pipe diameter and spacing of separator or hole, add at least 15% activity space. Confirm the inner width of steel drag chain(Customized according to the actual situation);

4. Confirm the bending radius of drag chain according to the bending degree of line and pipe. The bending radius is greater than the bending degree of line and pipe, plus at least 15% of the activity space.

Clear the above points, you know how large the model of steel drag chain, detailed parameters can consult us.