When metal moves against metal, it creates a lot of friction and wear, drastically reducing the life of your chain and components. Lubricants provide an oily film around the chain and components, lessening the impact of the metal-on-metal contact and slowing the rate of wear.
As well as protecting the metal elements of your conveyor systems, keeping it well-oiled will also reduce the operation noise, and prevent corrosion.
Lubrication is so critical to functionality that manufacturers usually submerge the chains in grease that solidifies in-factory. This grease provides a preliminary protective lubricant before shipping it to buyers.
Lubricants must be applied appropriately to be effective in protecting the chain. You can’t just brush or spray it over the outer surface. Chains consist of a series of joints and bearings, all of which need lubrication to ensure longevity. The lubricant must be applied thoroughly to all areas, including the inner and outer plates, and bearings.
What kind of lubricant should you use?
Environmental factors play a large part in determining the right type of lubricant for your conveyor chain. For example, operation conditions such as temperature, and the amount of dust will require different lubricants for optimum performance.
Some of your options include:
- Low temperature: Water repellent grease
- High Temperature: Wet film lubricant
- Dusty conditions: Dry film lubricant
2) Ensure quality equipment
When it comes to buying the equipment that will become the backbone of your processing, don’t settle for lesser quality for a lower up-front cost. Compromising on quality will only hurt you in the long run when components fail and need replacing.
Only buy from verified drive chain distributors so that you can be assured that you’re getting what you pay for: top quality. As well as quality, you want to make sure that you have the right equipment to suit the application and working environment. For example, if corrosion is a recurring issue for your conveyor system, consider replacing your chains with zinc-plated or stainless-steel ones.
3)Schedule chain conveyor maintenance
Quality equipment and lubrication are just one aspect of maintaining integrity and extending the life of your chain conveyor system. You should also keep a basic maintenance schedule, along with a logbook, to ensure your operations continue to run smoothly.
Make sure that any staff performing maintenance checks are trained and familiar with their tasks. They’ll also need to record their maintenance and any necessary data appropriately in the logbook.